Greenville Heating & Cooling Reviews

Local Reviews
for Greenville, WI

Rated 4.9 out of 5 stars based on 91 customer reviews

Map of Greenville, WI

Fast, Clean and Friendly Service




They did a fantastic job cleaning out our furnace and HEPA filters. Very friendly and when we set the appointment the office personnel were nice and professional on the phone. I highly recommend Black-Haak for any heating or air conditioning needs.


Map of Greenville, WI

Great service





Map of Greenville, WI

Service today





Map of Greenville, WI

Great service




Great as usual


Map of Greenville, WI

Great service





Map of Greenville, WI

Great Service. Friendly Technician




On time. Professional and friendly.


Map of Greenville, WI

Great customer service and very friendly employees





Map of Greenville, WI

Great service




I would recomend Black Haak Heating Service. Dan was very professional. He also did a good job of explaining the several things that are problematic with our older furnace.


Map of Greenville, WI

Furnace checkup





Map of Greenville, WI

Professional Service




Hunter arrived on time and performed work in a timely manner. He explained what was done and a asked if I had any questions or concerns. Thanks Hunter!


Julian  D.

Julian D.

Performed furnace start up; inspected the exhaust and intake PVC ensuring all connections were secured, I then sniffed the gas line for possible leaks, next I cycled the system on and checked gas pressures making adjustments on both stages, as well as ran a combustion test verifying no CO in the airstream, and lastly took a temp rise and got 40 degrees did make an adjustment to the fan speed and it went down to 37 after investigating found a xpanda filter in place of a 213 I replaced this filter with a real 213 air filter and that brought the temp rise up to 47 degrees those xpanda filters are too restrictive on the system and will result in a less efficient furnace. Also did want to note I did run an air advise test and found high levels of chemicals in the home this could be from cleaning products as well as off gasses from synthetic materials like carpet and furniture. High levels of chemicals in the home are caused by the lack of fresh air in the home normally during the winter mon

Near Peaceful Ct, Greenville, WI 54942
Chad W.

Chad W.

We removed the old furnace and installed a new unit. Tied into existing duct, gas line, venting and electric. Ran new drain.

Near Peaceful Ct, Greenville, WI 54942
Julian  D.

Julian D.

Performed furnace start up; inspected the exhaust and intake PVC ensuring all connections were secured, I then sniffed the gas line for possible leaks, next I cycled the system on and checked gas pressures and did make adjustments to both stages, lastly performed a combustion test verifying no CO in the airstream. This system is currently operating normal and heating at 52 degrees at this time. Job complete

Near Schroeder Farm Dr, Greenville, WI 54942
Hunter D.

Hunter D.

12/13/18. Removed old furnace. Installed new daikin furnace. Installed metal to close gap between duct and furnace. Reconnected electrical and thermostat wiring to new furnace. Hooked the venting and gas line back to furnace. Ran new drain hose from furnace and coil to floor drain. Installed a new t4 Honeywell thermostat. Started furnace and everything is running like it should be. Thank you for choosing Black-Haak heating for your heating needs.

Near Greenwood Rd, Greenville, WI 54942
Julian  D.

Julian D.

Performed furnace clean and tune; inspected the exhaust and intake PVC ensuring all connections were secured, I then removed and cleaned the burners along with the flame sensor, next I inspected the heat exchanger and did a powder test and did get blowback from all 3 cells, i then cycled the system and checked gas pressures and did make an adjustment, as well as performed a combustion test verifying no CO in the airstream. Due to age, condition, and cost to repair I highly recommend replacement of the system. Second opinion scheduled with Dan F on 12/13/18. Job complete

Near Arnies Ln, Greenville, WI 54942
Evan A.

Evan A.

Blower motor is dropping out randomly. After about 15 minutes of run time the furnace dropped the call for heat and immediately recycled with a call for heat. The blower motor is not finishing an off delay cycle before the new heat call is cycling the inducer. I removed the filter and blower door and let the system run, it didn’t drop out at all. I jumped out the thermostat to see if it was dripping the call for heat, the furnace dropped out again but gave me a main limit fault code this time. I changed the filter with a purolator filter. I recommend picking up some less restrictive filters for the future.

Near Sherwood Point Dr, Greenville, WI 54942
Hunter D.

Hunter D.

Performed level 2 furnace cleaning. Upon arrival, furnace had a lot of rusted water damage on the outside. I found the exhaust pipe leaking due to the rubber flash fitting not being tightened. I cleaned up the water and fastened the fitting. There are no leaks or standing water at this time. Burners are starting to wear. Heat exchanger is rusting and has metal chipping. Gas and exhaust levels are normal. No CO detected in the air. Drain is clear. Heat rise was 48 degrees. Unit is operating normally at this time. Thank you for choosing Black-Haak! Please take the time to complete our

Near Chapel Hill Dr, Greenville, WI 54942
Julian  D.

Julian D.

Performed furnace clean and tune; inspected the exhaust and intake PVC ensuring all connections were secured, I then removed and cleaned the burners along with the flame sensor, I then performed a combustion test verifying no CO in the airstream, I did want to make note inducer motor has a loud hum sign of bearing wear we’ll need to return to replace it, lastly replaced #35 water panel. This system is currently operating normal at this time. Job complete

Near Rocky Mountain Dr, Greenville, WI 54942
Dan E.

Dan E.

Furnace clean and tune. Checked heat exchanger, found several heavy rust spots and deep etching where cracks are forming. Found burners very rusted and corroded. Flame sensor/igniter is very worn. Ventor motor bearings are worn. Checked for CO in airstream, none found at this time. High XS air found in exhaust indicating that there is some blockage in secondary heat exchanger. CO levels in exhaust are also elevated. Average life of this unit is 14 years, this system is 17+ years old and in very poor shape. Failure is expected. Second opinion recommended. System operating normal at this time, however several issues found. Job complete.

Near Glennview Dr, Greenville, WI 54942
Hunter D.

Hunter D.

Performed level 2 furnace cleaning. Pilot and flame sensor are clean. Heat exchanger is also very worn and rusted. No cracks at this time. Gas and exhaust levels are normal. No CO detected in the air. Drain is clear. Unit is operating normally at this time.

Near Greenville Dr, Greenville, WI 54942
Anthony N.

Anthony N.

Was here for a furnace cleaning. Performed preferred customer furnace cleaning. Completed furnace cleaning form. Furnace is running normally at this time..

Near Medina Dr, Greenville, WI 54942
Hunter D.

Hunter D.

Installed new furnace took old one out, hooked up venting gas line, and electrical back on. All duct modifications are done on the supply, return hooked right back up. Ran all new drain lines for furnace and A/C. New thermostat on the wall

Near Moon Shadow Dr, Greenville, WI 54942
Anthony N.

Anthony N.

Was here for a furnace no heat. We energies was out here earlier and shut the furnace down due to high CO in the exhaust. Retested the exhaust. The exhaust reading was over 1000 ppm CO. Took measurements of the furnace. My supervisor will call in the morning. This furnace is considered unsafe to operate due to the high CO reading. Shut the power back off to the furnace and turned the gas off to the furnace.

Near Moon Shadow Dr, Greenville, WI 54942
Hunter D.

Hunter D.

Performed level 2 furnace cleaning. Burners and flame sensor are clean. Heat exchanger looks good. Gas and exhaust levels are normal. No CO detected in the air. Drain is clear. Heat rise was 47 degrees. Unit is operating normally at this time.

Near Glennview Dr, Greenville, WI 54942
Mark P.

Mark P.

Installed garage heater new gas piping venting and low voltage all tested and up and running re gas piped into the house.

Near Julius Dr, Greenville, WI 54942
Hunter D.

Hunter D.

Performed start up on a new furnace. No gas leaks detected. Gas and exhaust levels are normal. No CO detected in the air. Drain is working. Venting and electrical components are properly installed. High limit passed safety test. Heat rise was 43 degrees. Unit is operating normally at this time.

Near Snowdrop Ct, Greenville, WI 54942
Anthony N.

Anthony N.

Was here for a furnace start up. Performed preferred customer furnace start up completed furnace start up form. Furnace is running normally at this time.

Near School Rd, Greenville, WI 54942
Hunter D.

Hunter D.

Installed new furnace took old one out, hooked up the venting,gas, and electrical back on. All new duct modification on the supply. Ran a new drain line for furnace and A/C. Put a new WiFi thermostat on the wall

Near Schroeder Farm Dr, Greenville, WI 54942
Hunter D.

Hunter D.

Performed level 2 furnace cleaning. Burners and flame sensor are clean. Heat exchanger looks good. Gas and exhaust levels are normal. No CO detected in the air. Drain is clear. Heat rise was 38 degrees. Filters were delivered. Unit is operating normally at this time.

Near Redwing Dr, Greenville, WI 54942
Anthony N.

Anthony N.

Was here for a furnace cleaning. Performed preferred customer furnace cleaning. Completed furnace cleaning form. The furnace is running normally at this time. Found that the inducer bearings are starting to get worn. Checked the inducer motor amps. Inducer motor amps are still good. Called the office to check the warranties. The warranty on the furnace is expired. The customer will wait to replace the inducer motor.

Near Brackenwood Ln, Greenville, WI 54942
Hunter D.

Hunter D.

Performed start up on a new furnace. No gas leaks detected. Gas and exhaust levels are normal. No CO detected in the air. Drain is working. Venting and electrical components are properly installed. High limit passed safety test. Heat rise was 43 degrees. Unit is operating normally at this time. We will return to investigate airflow problems with certain heat runs.

Near Windward Dr, Greenville, WI 54942
Anthony N.

Anthony N.

The customer is going with a package cleaning. Was here for the furnace portion of the cleaning. Performed preferred customer furnace cleaning. Completed furnace cleaning form. Furnace is running normally at this time. Office to call in the spring to schedule the air conditioning cleaning.

Near Glen Rose Ln, Greenville, WI 54942
Anthony N.

Anthony N.

Was here for two furnace cleanings. Performed preferred customer furnace cleaning on the furnace for the first and second floor. Cleaned the burners. checked the heat exchanger. Found some minor rusting inside the heat exchanger most likely due to the amount of usage. Wiped down the inside of the furnace. Checked the motors for proper operation. Adjusted the gas pressure. Checked combustion air. Checked for co in the air stream. Found none. The furnace is running normally at this time. Recommend continuing getting the furnace checked yearly to monitor the rust in the heat exchanger. Performed preferred customer furnace cleaning on the basement furnace. Cleaned the burners, checked the heat exchanger, wiped down the inside of the furnace. Checked the motors for proper operation. Adjusted the gas pressure. Checked combustion air. Checked for co in the air stream. Found none. The furnace is running normally at this time.

Near Forest Glen Dr, Greenville, WI 54942
Anthony N.

Anthony N.

Was here for a furnace cleaning. Performed preferred customer furnace cleaning. Completed furnace cleaning form. Furnace is running normally at this time.

Near Savannah Dr, Greenville, WI 54942
Anthony N.

Anthony N.

Was here for a furnace cleaning. Performed preferred customer furnace cleaning. Completed furnace cleaning form. Furnace is running normally at this time.

Near Savannah Dr, Greenville, WI 54942

If you're in Greenville, give us a call at (920) 757-9990 for a free estimate. We look forward to serving you and please leave us a review!

Need Heating & Cooling Services?

We are here to serve your Fox Valley home or business!